

0%
ICM42S
- Where to use
- Features
- Download
Four high speed ICP® based Modules are integrated with an SC42S Signal Conditioning board to provide a single Compound-Module, the ICM42S. This provides 16 ICP® or voltage input mode channels as well as 16 monitoring output channels.
- With any ICP® based sensor commonly used to measure acceleration, force or pressure
- With any voltage source up to ±10 V in voltage input mode
- When the conditioned input signal needs to be provided to external equipment
- 16 channels
- 2 input modes of operation:
- ICP® mode with 4 mA constant current at ±12 V excitation
- Voltage input mode with AC or DC coupling
- 16 monitoring output channels of conditioned signal inputs
- Supports TEDS IEEE 1451.4 V0.9, V1.0 (Class 1)
- 24-bit resolution, 204.8 kSa/s sampling rate per channel, 90 kHz bandwidth
- <0.2° @ 10 kHz phase accuracy between channels of the same or any other Module
- ±(10 V, 1 V and 100 mV) input ranges
- There are 3 distinctive input mode options:
- Differential or Balanced Float (ICP® mode provides ±12 V excitation) for both ICP® and voltage input modes
- Single-Ended or Unbalanced Float for voltage input mode
- Single-Ended or Unbalanced Ground for voltage input mode
- Short and open circuit cable monitoring
- Signal integrity circuit continuously monitors the input and disconnects sensitive circuits during overload conditions
- Pre and post filter overflow monitoring
- Selectable low and high pass digital filters
- 2 MΩ differential and 1 MΩ single-ended input impedance
- Input channels use a DB50 for 16 input channels
- Monitoring channels use 4 Lemo 7 way EHG.0B connectors
- An option is available providing 8 mA constant current and 2 Lemo 16-way EGG.1B way connectors for monitoring channels
- Broschüre: PAK MKII Hardware
- Film: The PAK MKII Frontend